2005 API 1104(part C)

문제번호	Question	Section
1	IPD정의	9.3.5
2	Tensile Test Requirments	5.6.2.3
3	Film 저장방법	11.1.9.1
4	Welder Qualification 시편개수	Table 3
5	Company rejection right	9.2
6	Automatic welding procedure spec. information	12.4.2
7	Crown surface 높이(1/16")	7.8.2
8	Shielding gases 종류	4.2.3.1
9	Defect제거시 제거방법(entiely from sound metal ?)	10
10	film images are interpretable for at least 3years	11.1.11
11	Filler metal Group(E7016 -> E9018)	Table 1
12	Fillet welds test requirements(gas pocket)	5.8.3
13	Nde personnel Recertified	8.4.2
14	Welder Qualification (Prior to ~	6.1
20	Shielding gases Storage and Handling	4.2.3.2
38	Procedure specification informaion	5.3.2
27	Procedure specification essential variables	5.4.2
34	Procedure specification essential variables	5.4.2
36	Filler metal Group(E7010 -> E7018)Requalfication	Table 1
41	Tensile Test specimens Preparation	5.6.2.1
29	Procedure qualification test 시편개수 (OD10.5", T 05.")	Table 2
44	Fillet welds test preparation	5.8.1
24	Multiple qualification test(OD 6.5") essential variable	6.3.2
46	The surface to be welded shall ~ (scale 이 문제에 나옴)	7.1
26	Field bevel	7.4.2
32	When the pipe is welded above ground~ 16"	7.6
19	The face of the completed~ 1/8"	7.8.2
16	Preheat  - procedure specification shall specify	7.11
40	Inspection personnel documentation a, b, c	8.3
18	Nonestructive personnel procedure	8.4.1
23	IP individual exceeds 1"	9.3.1.a
42	IC 합격기준	9.3.6
23	ISI 합격기준 aggregate length in 12" - 1/2"	9.3.8.2.d
25	HB 합격기준	9.3.9.4
15	Cracks may be ~ 8%	10.1.1
23	Crack 수정기준(???????)	10.1.1
43	결함수정 방법(without prior company authorization)	10.1.2
39	Repaired areas shall be ~	10.3.1
21	A copy of the record shall be furnished ~	11.1.2.1
37	Film radiography details	11.1.2.2
45	whenever more ~ (identification markers) ~ (overlap)	11.1.8
30	The radiographer shall be responsible for ~	11.1.13